Dice Tower, Part 1
Traduction: [ Google | Babelfish ]
Catégories : [ Bricolage | Jeux ]
I've decided to build a dice tower. Not the same as everybody else is building (not that it's not good, I'm just being posh there), but a tower where the dice roll in every direction, instead of in only one vertical plan. Drawing the plan took two evenings and a bit of a headache for the middle part, but it's done and the plan looks correct. The core is going to be 36cm tall with a 12x12cm base.
For the building, I've decided to carve it out of polyurethane foam. I've bought a can of liquid PU foam, and I'll have to make three cubes out of it. I'll use a cardboard box as a form, and carve the cubes with saw and knife. The I'll glue the cubes together and add side walls and a tray at the bottom for the dice to roll into when coming out of the tower.
[ Posté le 1er septembre 2007 à 17:10 | 4 commentaires | lien permanent ]
Hi, I recently saw your dice tower searching google and I liked a lot, I would like to make one.... but
Is there any way to post the exact measurements of each shape that forms the structure? because the one on the image is difficult to read.